BLACK BITUMINOUS PAINT

crown-black-bituminous

BLACK BITUMINOUS PAINT

Characteristics: A heavy-duty, anti-corrosive bituminous solution.

Advantages: Economical. Non-toxic. A waterproof composition which fills minor pits, cracks and other irregularities, forming a smooth coating.

Finish: Semi-gloss.

Application: By brush.

Thinning: Use as supplied on non-porous surfaces. On porous, uncoated masonry thin to ease brushing with Crown White Spirit. Avoid over thinning. Stir well before use.

Drying Times: Surface dry: 2 hours. Recoatable: 14 hours. Hard dry several days.

Description

PRODUCT DESCRIPTION

A black bituminous paint especially suitable for the interior coating of drinking water tanks, but may be used on general water tanks and pipework. Recommended where a protective and economical finish is required. Can be applied to most surfaces including iron and steelwork, cement renderings, brick, stone etc.

Characteristics: A heavy-duty, anti-corrosive bituminous solution.

Advantages: Economical. Non-toxic. A waterproof composition which fills minor pits, cracks and other irregularities, forming a smooth coating.

Finish: Semi-gloss.

Application: By brush.

Thinning: Use as supplied on non-porous surfaces. On porous, uncoated masonry thin to ease brushing with Crown White Spirit. Avoid over thinning. Stir well before use.

Drying Times: Surface dry: 2 hours. Recoatable: 14 hours. Hard dry several days.

Spreading Capacity: Smooth metal surfaces approximately 10-11 m2/l. Cement rendering, approximately 7-8 m2/l. The spreading capacity will be considerably reduced when applied on rough, porous surfaces.

Equipment Cleaner: Crown White Spirit.

Colour range: Black.

Pack Sizes: 1 litre, 4 litres and 20 litres.

Availability: From Crown Depots in Nairobi, Mombasa and Kisumu and through Crown Stockists.

SPECIFICATIONS

New Metal and Galvanized Drinking Water Tanks: Prepare surface (refer Data Sheet SP 3)Apply 1 coat Crown Zinc Phosphate Primer. Apply 3 coats Crown Black Bituminous Paint.

General – Purpose use on New Iron and Steelwork: Prepare surface (refer Data Sheet SP 3). Apply 1 coat (appropriate) primer. Apply 2-3 coats Crown Black Bituminous Paint.

New (dry) and unpainted Plaster, Cement rendering, Brick, Stone: Prepare surface (refer Data Sheet SP 1)Apply 3 coats Crown Black Bituminous Paint, thinning the first coat to ease brushing and improve adhesion.

Previously Painted Surfaces: Prepare surface and patch prime bare metal surface with the appropriate Crown primer. Apply 2 coats Crown Black Bituminous Paint.

Note:

Coated water tanks should be flushed out with clean water before use.

Reviews

There are no reviews yet.


Be the first to review “BLACK BITUMINOUS PAINT”

You've just added this product to the cart: